<?xml version="1.0" encoding="UTF-8"?><metadata xml:lang="en">
<Esri>
<CreaDate>20220411</CreaDate>
<CreaTime>15331500</CreaTime>
<ArcGISFormat>1.0</ArcGISFormat>
<ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
<SyncOnce>FALSE</SyncOnce>
<DataProperties>
<itemProps>
<itemName Sync="FALSE">Contours_2021</itemName>
<nativeExtBox>
<westBL Sync="TRUE">1287000.499734</westBL>
<eastBL Sync="TRUE">1313999.499541</eastBL>
<southBL Sync="TRUE">270000.500150</southBL>
<northBL Sync="TRUE">304615.500146</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
<imsContentType Sync="TRUE">002</imsContentType>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Foot_US (0.304801)</csUnits>
<projcsn Sync="TRUE">NAD_1983_StatePlane_Washington_North_FIPS_4601_Feet</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/3.2.0'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_StatePlane_Washington_North_FIPS_4601_Feet&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,1640416.666666667],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-120.8333333333333],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,47.5],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,48.73333333333333],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,47.0],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,2285]],VERTCS[&amp;quot;NAVD88_height_(ftUS)&amp;quot;,VDATUM[&amp;quot;North_American_Vertical_Datum_1988&amp;quot;],PARAMETER[&amp;quot;Vertical_Shift&amp;quot;,0.0],PARAMETER[&amp;quot;Direction&amp;quot;,1.0],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,6360]]&lt;/WKT&gt;&lt;XOrigin&gt;-117104300&lt;/XOrigin&gt;&lt;YOrigin&gt;-99539600&lt;/YOrigin&gt;&lt;XYScale&gt;3048.0060960121928&lt;/XYScale&gt;&lt;ZOrigin&gt;-100000&lt;/ZOrigin&gt;&lt;ZScale&gt;3048.0060960121923&lt;/ZScale&gt;&lt;MOrigin&gt;-100000&lt;/MOrigin&gt;&lt;MScale&gt;10000&lt;/MScale&gt;&lt;XYTolerance&gt;0.0032808333333333331&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.0032808333333333331&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;102748&lt;/WKID&gt;&lt;LatestWKID&gt;2285&lt;/LatestWKID&gt;&lt;VCSWKID&gt;105703&lt;/VCSWKID&gt;&lt;LatestVCSWKID&gt;6360&lt;/LatestVCSWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<SyncDate>20250404</SyncDate>
<SyncTime>10141300</SyncTime>
<ModDate>20250404</ModDate>
<ModTime>10141300</ModTime>
<ArcGISProfile>FGDC</ArcGISProfile>
<scaleRange>
<minScale>150000000</minScale>
<maxScale>5000</maxScale>
</scaleRange>
</Esri>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdChar>
<CharSetCd Sync="TRUE" value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<mdDateSt Sync="TRUE">20250404</mdDateSt>
<distInfo>
<distFormat>
<formatName Sync="TRUE">Enterprise Geodatabase Feature Class</formatName>
</distFormat>
</distInfo>
<dataIdInfo>
<envirDesc Sync="FALSE">Esri ArcGIS 13.2.4.49743</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="FALSE">Contours_2021</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<vertEle>
<vertMinVal Sync="TRUE">0.000131</vertMinVal>
<vertMaxVal Sync="TRUE">0.000131</vertMaxVal>
</vertEle>
</dataExt>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-122.272148</westBL>
<eastBL Sync="TRUE">-122.159825</eastBL>
<northBL Sync="TRUE">47.827365</northBL>
<southBL Sync="TRUE">47.731155</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
<searchKeys>
<keyword>bothell</keyword>
<keyword>wa</keyword>
<keyword>washington</keyword>
<keyword>lidar</keyword>
<keyword>elevations</keyword>
<keyword>elevation</keyword>
<keyword>digital elevation model</keyword>
<keyword>dem</keyword>
<keyword>bare earth</keyword>
<keyword>ground</keyword>
<keyword>remote sensing</keyword>
<keyword>topography</keyword>
<keyword>topographic</keyword>
<keyword>topo</keyword>
<keyword>relief</keyword>
<keyword>contours</keyword>
<keyword>contour</keyword>
</searchKeys>
<idPurp>2-foot contour lines show the general elevation trends across the City of Bothell, WA and surrounding area. These contour lines were developed from bare earth (ground) elevation points in lidar data collected between April 1 and April 15, 2021.</idPurp>
<idAbs>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;2-foot contour lines show the general elevation trends across the City of Bothell, WA and surrounding area. These contour lines were developed from bare earth (ground) elevation points in lidar data collected between April 1 and April 15, 2021.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;City of Bothell staff developed the contour lines by first creating a 1-foot resolution bare earth elevation raster (also known as a Digital Elevation Model, or DEM) from the lidar LAS data (point cloud) provided by the contractor. The digital elevation model attempts to show the ground elevations without any surface features such as buildings or trees. Where surface features obstruct lidar pulses from reaching the ground (e.g. under a building), the DEM approximates the ground elevation from the surrounding area. Hydroflattening on large bodies of water (e.g. the Sammamish River) was also applied using breaklines provided by the contractor. Contours were created from this DEM raster, and general smoothing and simplification post-processing were applied to remove noise and data artifacts and to speed up display. ArcGIS Desktop 10.8.1 (ArcMap) was used for all steps by City of Bothell staff.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN /&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Metadata from NV5 Geospatial (contractor):&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;The purpose of the lidar data was to produce a high accuracy 3D dataset that meets all necessary standards laid out by the 3D Elevation Program and the WA King County contract. The lidar point cloud data were used to create classified lidar LAS files, intensity images, hydro-flattened DEMs, highest hit DSMs, and 3D breaklines of rivers and lakes within the study area.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Product: Classified LAS 1.4 files, formatted to 1294 individual 4500usft x 4500usft tiles covering the WA King County project area.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Geographic Extent: This dataset and derived products encompass an area covering approximately 563,405 acres of Western Washington.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Dataset Description: The WA King County Lidar project called for the planning, acquisition, and processing of lidar data collected to Quality Level 1 (QL1) standards for this portion of the project area. Project specifications are based on the U.S. Geological Survey National Geospatial Program LIDAR Base Specification, Version 2.1. The data was developed based on the NAD83 2011 horizontal datum and the NAVD88 Geoid 18 vertical datum. Data was projected in Washington State Plane North, U.S. survey feet. Lidar data was delivered as calibrated and classified LAS 1.4 files. Non-Vegetated Vertical Accuracy (NVA) was assessed using 0 check points located on bare earth in clear, unobstructed areas. Vegetated Vertical Accuracy (VVA) was assessed using 0 check points in Tall Grass, Forest, and Shrub landcover types. Single swath nominal pulse spacing (NPS) was designed to be 0.50 m at nadir. Aggregate Nominal Pulse Spacing (ANPS) was calculated to be 0.35 m using all valid first return points. Derived products include: Intensity Imagery, Hydro-flattened Bare Earth Digital Elevation Models (DEMs), Highest Hit Digital Surface Models (DSMs), and 3D waters edge breaklines.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Ground Condition: Ground condition was free of snow and acquisition occured free of smoke, fog and cloud cover.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Ground Control Points were acquired and calibrated by NV5 Geospatial.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;All lidar data acquisition, calibration, and follow-on processing were completed by NV5 Geospatial.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Users should be aware that temporal changes may have occurred since this dataset was collected and that some parts of these data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of its limitations. Acknowledgment of the U.S. Geological Survey would be appreciated for products derived from these data.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</idAbs>
<idCredit>U.S. Geological Survey, Quantum Spatial, Inc., NV5 Geospatial
Acknowledgment of the U.S. Geological Survey would be appreciated for products derived from these data.
Ground Control Points were acquired and calibrated by NV5 Geospatial.
All lidar data acquisition, calibration, and follow-on processing were completed by NV5 Geospatial.
Created and maintained by:
City of Bothell | Washington State
Information Services Department | GIS Services Section
18415 101st Ave NE | Bothell, WA 98011
P: 425.806.6170
E: GISRequest@bothellwa.gov</idCredit>
<resConst>
<Consts>
<useLimit>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;None. However, users should be aware that temporal changes may have occurred since this dataset was collected and that some parts of these data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of its limitations. Acknowledgment of the U.S. Geological Survey would be appreciated for products derived from these data.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;The City of Bothell delivers this data (map) in an AS-IS condition. GIS data (maps) are produced by the City of Bothell for internal purposes. No representation or guarantee is made concerning the accuracy, currency, or completeness of the information provided.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</useLimit>
</Consts>
</resConst>
</dataIdInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="Contours_2021">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">29797</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="2285"/>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">5.3(9.0.0)</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<eainfo>
<detailed Name="Contours_2021">
<enttyp>
<enttypl Sync="FALSE">Contours_2021</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">29797</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">Contour</attrlabl>
<attalias Sync="TRUE">Contour</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE</attrlabl>
<attalias Sync="TRUE">SHAPE</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">GlobalID</attrlabl>
<attalias Sync="TRUE">GlobalID</attalias>
<attrtype Sync="TRUE">GlobalID</attrtype>
<attwidth Sync="TRUE">38</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE.STLength()</attrlabl>
<attalias Sync="TRUE">SHAPE.STLength()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
</eainfo>
<spdoinfo>
<ptvctinf>
<esriterm Name="Contours_2021">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="3"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">29797</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">TRUE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
</metadata>
