<?xml version="1.0" encoding="UTF-8"?><metadata xml:lang="en">
<Esri>
<CreaDate>20181029</CreaDate>
<CreaTime>16263800</CreaTime>
<ArcGISFormat>1.0</ArcGISFormat>
<SyncOnce>FALSE</SyncOnce>
<DataProperties>
<itemProps>
<itemName Sync="FALSE">ErosiveSoils</itemName>
<nativeExtBox>
<westBL Sync="TRUE">1290187.749921</westBL>
<eastBL Sync="TRUE">1313411.875061</eastBL>
<southBL Sync="TRUE">269536.968597</southBL>
<northBL Sync="TRUE">304783.531306</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
<imsContentType Sync="TRUE">002</imsContentType>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Foot_US (0.304801)</csUnits>
<projcsn Sync="TRUE">NAD_1983_StatePlane_Washington_North_FIPS_4601_Feet</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/3.2.0'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_StatePlane_Washington_North_FIPS_4601_Feet&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,1640416.666666667],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-120.8333333333333],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,47.5],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,48.73333333333333],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,47.0],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,2285]],VERTCS[&amp;quot;NAVD_1988_Foot_US&amp;quot;,VDATUM[&amp;quot;North_American_Vertical_Datum_1988&amp;quot;],PARAMETER[&amp;quot;Vertical_Shift&amp;quot;,0.0],PARAMETER[&amp;quot;Direction&amp;quot;,1.0],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,6360]]&lt;/WKT&gt;&lt;XOrigin&gt;-117104300&lt;/XOrigin&gt;&lt;YOrigin&gt;-99539600&lt;/YOrigin&gt;&lt;XYScale&gt;3048.0060960121928&lt;/XYScale&gt;&lt;ZOrigin&gt;-100000&lt;/ZOrigin&gt;&lt;ZScale&gt;3048.0060960121923&lt;/ZScale&gt;&lt;MOrigin&gt;-100000&lt;/MOrigin&gt;&lt;MScale&gt;10000&lt;/MScale&gt;&lt;XYTolerance&gt;0.0032808333333333331&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.0032808333333333331&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;102748&lt;/WKID&gt;&lt;LatestWKID&gt;2285&lt;/LatestWKID&gt;&lt;VCSWKID&gt;105703&lt;/VCSWKID&gt;&lt;LatestVCSWKID&gt;6360&lt;/LatestVCSWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<SyncDate>20250404</SyncDate>
<SyncTime>10220100</SyncTime>
<ModDate>20250404</ModDate>
<ModTime>10220100</ModTime>
<ArcGISProfile>ItemDescription</ArcGISProfile>
<scaleRange>
<minScale>50000</minScale>
<maxScale>5000</maxScale>
</scaleRange>
</Esri>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdChar>
<CharSetCd Sync="TRUE" value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<mdDateSt Sync="TRUE">20250404</mdDateSt>
<distInfo>
<distFormat>
<formatName Sync="TRUE">Enterprise Geodatabase Feature Class</formatName>
</distFormat>
</distInfo>
<dataIdInfo>
<envirDesc Sync="FALSE">Esri ArcGIS 13.2.4.49743</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="FALSE">ErosiveSoils</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<vertEle>
<vertMinVal Sync="TRUE">0.000131</vertMinVal>
<vertMaxVal Sync="TRUE">0.000131</vertMaxVal>
</vertEle>
</dataExt>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-122.259188</westBL>
<eastBL Sync="TRUE">-122.162180</eastBL>
<northBL Sync="TRUE">47.827798</northBL>
<southBL Sync="TRUE">47.730047</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
<idPurp>Created to identify areas of surface soils classified as erosive as
defined by the U.S. Soil Conservation Service.</idPurp>
<idAbs>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P STYLE="margin:0 0 0 0;"&gt;&lt;SPAN&gt;Erosive soils in the Bothell area identified by specific soil types, defined by soil surveys done by the U. S. Soil Conservation Service in 1973 (King County) and 1983 (Snohomish County), having either "severe" or "very severe" susceptibility to erosion.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</idAbs>
<searchKeys>
<keyword>City of Bothell</keyword>
<keyword>Washington</keyword>
<keyword>Erosive Soils</keyword>
</searchKeys>
<resConst>
<Consts>
<useLimit>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;&lt;SPAN&gt;The map outlines the boundaries of geologic deposits that meet the critical-area definition of the City of Bothell (BMC 14.04) but does not assure either the presence or the absence of that critical area, or its associated geologic hazard, at any given location. This map should be used only as a general guide for delineating areas prone to the designated geologic hazard. Given the coarse scale of the underlying data (1:24,000), it is not a substitute for site-specific investigation to assess the potential for hazards that could potentially affect any development project. This map cannot be used to determine the presence or absence of a geologic hazard beneath any specific locality. Such determination, and specification of any appropriate remedial actions, requires a site-specific geotechnical investigation performed by a qualified practitioner.&lt;/SPAN&gt;&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;The City of Bothell delivers this data (map) in an AS-IS condition. GIS data (maps) are produced by the City of Bothell for internal purposes. No representation or guarantee is made concerning the accuracy, currency, or completeness of the information provided.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</useLimit>
</Consts>
</resConst>
<idCredit>This map (data) has been prepared from a combination of high-quality digital elevation data and best-available geologic information, developed at the University of Washington in 2002 from existing geologic information and compiled at a scale of 1:24,000 (1" = 2000'). Elevation contours are from City of Bothell topographic survey; datum is mean sea level. The map outlines the boundaries of geologic deposits that meet the critical-area definition of the City of Bothell (BMC 14.04) but does not assure either the presence or the absence of that critical area, or its associated geologic hazard, at any given location.
Created and maintained by: GIS Services in cooperation with University of Washington
City of Bothell | Washington State |
Employee and Technology Services Department | GIS Services Division
18415 101st Ave NE | Bothell, WA 98011
P: 425.806.6170
E: GISRequest@bothellwa.gov
</idCredit>
</dataIdInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="ErosiveSoils">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">105</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="2285"/>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">5.3(9.0.0)</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<eainfo>
<detailed Name="ErosiveSoils">
<enttyp>
<enttypl Sync="FALSE">ErosiveSoils</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">105</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">EROSIVITY</attrlabl>
<attalias Sync="TRUE">EROSIVITY</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">UpDt</attrlabl>
<attalias Sync="TRUE">UpDt</attalias>
<attrtype Sync="TRUE">Date</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">UpDtBy</attrlabl>
<attalias Sync="TRUE">UpDtBy</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">GenNote</attrlabl>
<attalias Sync="TRUE">GenNote</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">250</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE</attrlabl>
<attalias Sync="TRUE">SHAPE</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">GlobalID</attrlabl>
<attalias Sync="TRUE">GlobalID</attalias>
<attrtype Sync="TRUE">GlobalID</attrtype>
<attwidth Sync="TRUE">38</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE.STArea()</attrlabl>
<attalias Sync="TRUE">SHAPE.STArea()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE.STLength()</attrlabl>
<attalias Sync="TRUE">SHAPE.STLength()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
</eainfo>
<spdoinfo>
<ptvctinf>
<esriterm Name="ErosiveSoils">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">105</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">TRUE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
</metadata>
